|
06-08-2014, 09:23 PM
|
#1 |
|
Registered User
Join Date: May 2014
Location: Allen, TX
Posts: 32
|
Ignition Problem
Ok, so I am getting 12v at the positive post of the coil (points style ignition)my wiring harness on the driver side firewall appears not to have a resistor wire (pic attached)...so I install a BWD RU19 resistor between the yellow wire and + term of the coil and I'm still reading 12v (at the wire separate and connected to coil) with the ignition on.
Am I crazy or should I see less than 12v with the ballast resistor installed? http://www.oreillyauto.com/site/c/de...2763&ppt=C0334 |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode