![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Chance
![]() Join Date: Sep 2001
Location: Belcourt ,ND, USA
Posts: 750
|
Water Pump Failure Symptoms - no heat
Question guys. I changed radiators since I though it was the reason my truck was loosing antifreeze and warmer than expected. Well the new radiator is in as well as a new 180F thermostat. I have no heat. I had heat before I changed the radiator. I made sure to flush the radiator with water since I thought it was full of air. I bled the system properly. When the engine reaches operating temperature I am able to squeeze close both the upper radiator hose, lower radiator hose and even the elbow hose that connects the hose to the intake. Both heater core hoses are cold. I had heat for a few seconds when I removed the heater core return hose while the truck was running and then put it back on the radiator.
Let me know your suggestions because I am pretty confused.
__________________
1968 Chevrolet Stepside BB 396 w/TH400 1972 Chevrolet 3/4 Ton 4x4 BB 496 w/TH400 |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|