![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Apr 2007
Location: Santa Rosa, Ca
Posts: 586
|
Help needed with frame to cab mount brackets 69 cab on 65 frame
![]() I have been working on a custom frame for my 69 GMC short bed that you can see in my build thread in my signature. the frame that I've used is a 1965 c10 short bed. I was told the frames were the same 62-72 and they appear to be the same with only slight differences. Anyways I have determined one of these differences is the rear cab mount bracket, which seems to be an inch taller than the one used on the 69. I had a spare frame from a 68 which we had previously cut up and i have the section where the rear cab mount bracket normally is plug welded to. the problem that I am encountering now is that none of the holes seem to line up. There is a big hole that I believe to be a positioning hole. my question is do I use this hole to center my 69 cab mount bracket? here are some pics. Any insight with this is apreciated.
__________________
My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=456220 Best 1/4 mile time 12.1 @ 111 w/traction issues 1969 GMC SWB 1964 chevy II Nova ht |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|