powerglide swap

[Irishbleueyes]

Originally Posted by WhippinSaw

I used Lokar's Column Shift Linkage ACA-1800, You have to unbolt the shifter on the th350 and this bolts on, The shifter on the power glide does not unbolt from the outside. The 5/16th rod that comes with the kit was 3 inches too short (I needed one 26 " long) and I had to get a longer piece and bend it like the stock one, The indicator is off a little but it works and I am going to adjust it some more during the winter storage. Maybe there is better one out there. I know CPP makes one also.

Thats a lot cleaner set up than stock. Lokar have the longer rod or did you make it?