![]() |
![]() |
#1 |
Registered User
Join Date: May 2014
Location: Granbury texas
Posts: 96
|
3 on the tree
Unusual problem. When I align the 3/16 pin in the slots and adjust the linkage it puts the column lever too far down and hits my leg. If I rest the pin on the column slot and push it through the actual lever holes then adjust the linkage the column lever is fine. Any comments? I did read the article that most folks point you too but it doesn't address this issue.
|
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|