Project Roxy

[lolife99]

Originally Posted by Rochlow

Guy running Dropmembers and disks in the front ( I have CPP 13" rotors in the front). What are you using for brake hose kits (size, length, etc). CPP has a 7/6" and a 10mm stainless braided kit, but was wondering if I should get the 12" or 14" length.

I would think it would depend on where the flex line connects to the steel line.

I would air it up and measure.
And the lay it out and measure.
Vacume hose is good to mock up your length, so you can turn the wheels also.
Straight fittings or 90 degree fittings at the caliper also affect the length.