Quote:
Originally Posted by Ozzy2013
So did you sand blast the frame?Did it have undercoat on it?Love the gauges where did you find ones that fit?I know this was back in 2013 but any info would be greatly appreciated .Thank Oz
|
Hi Oz, I did have the frame blasted before the powder coating. The frame originally did not (as far as I could tell) have any under coating. I say that because the frame you see before the coating was so covered in mud and grease, you couldn't see the actual frame. If it did have the under coating on it, it got blasted off. Now technically those gauges did not fit my bezel. The speedo and tach were just 5 inch gauges and the smaller gauges I believe we're 2 3/4 inch gauges. I had to shave the holes out to fit the gauges. Interesting tidbit: The clock in the center, I had to make a filler piece to fit that one in. It was too small of a hole to fit a 5 inch gauge and too big for a 2 3/4. I was really happy with how it turned out. Although I did end up selling them. Any other questions are very welcome. I love talking trucks!