Need help choosing welder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tzclark · 10-28-2014, 09:28 PM

Ok so I have narrowed it down to Lincoln 210mp and miller 211. My old welder was a Hobart with similar specs as these two but had a unfortunate encounter with a 30000lb forklift and its tire. I use the welder mostly for hobby and truck but on occasion take it to work for welding some supports for cable, or electrical equipment. Both welder have similar capabilities but the Lincoln is about half the weight which is what is catching my attention. Both are good brands.

http://www.millerwelds.com/products/...p?model=M00245

http://www.lincolnelectric.com/en-ca...roduct=K3963-1

10-28-2014, 09:28 PM	#1
Tzclark Registered User Join Date: Feb 2014 Location: Chilliwack, BC Posts: 139	Need help choosing welder Ok so I have narrowed it down to Lincoln 210mp and miller 211. My old welder was a Hobart with similar specs as these two but had a unfortunate encounter with a 30000lb forklift and its tire. I use the welder mostly for hobby and truck but on occasion take it to work for welding some supports for cable, or electrical equipment. Both welder have similar capabilities but the Lincoln is about half the weight which is what is catching my attention. Both are good brands. http://www.millerwelds.com/products/...p?model=M00245 http://www.lincolnelectric.com/en-ca...roduct=K3963-1 __________________ 1972 Chevy shortbox, done up 396bbc 1968 Plymouth Roadrunner, 1000hp twin 72mm turbos 2017 F350 Lariat, 6.7, stock except leveling kit and larger tires 2014 nissan pathfinder sl (the kid hauler)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.