78 C10 Bonanza Cargo Light

[donald_b_bell]

My 1978 C10 Bonanza had a previous owner place a camper shell on the bed. The OEM Cargo Light did not fit with the camper shell, so it was removed and discarded. The wires were cut and the hole was closed with a piece of aluminum. I bought a new cargo light assembly and a wiring harness from LMC. The wiring harness includes about four feet of wire with numerous connectors. There are two single conductor connectors on the orange wire. There is a large two conductor connector (white and orange) near the end, then there are two single conductor connectors at the very end (one on white and one on orange).

Where does this connect inside the truck and what is to be done with all of the connectors? How do you manage to snake all of this wire back down the passageway between the outside of the cab and the inside of the cab? My truck does not have a headliner.