New engine... no good

[Jimal]

Originally Posted by jayoldschool

Also... what rockers are those? There are some sketchy cheap ones out there.

They appear to be these:



The issue isn't that they're cheap and sketchy so much as they're probably overkill for this application.

Originally Posted by awbrown

You can see that that one push rod tip is damaged , I would pull all the pushrods out and inspect them .. also check the rocker arm geometry , it may need a different length pushrod , if it has been run then the lifters should stay with the same lobe that they are mated to ...

Is the tip missing, or just hiding behind the oil gallery casting?