replacing rubber fuel line on f-pump leak

[SCOTI]

Originally Posted by donut

I wouldn't use sealer, light flair, you could double up clamps. If using worm or spring clamps, make sure the screws are offset 90-180*. (don't over tighten the clamps.)

Also make sure the steel line isn't split and your not trying to seal a 3/8" rubber line on a 5/16" steel nipple.

Other thing, you could re-do the steel line or if that isn't an option, you can get a brass, barbed nipple and use that off the pump.

This is what I was wondering. Easy thing to overlook/assume....