![]() |
![]() |
#1 |
Registered User
![]() Join Date: Feb 2013
Location: Spring Hill, Florida
Posts: 465
|
First carb rebuild
well I have been thinking I should rebuild my carb for a while now. Its just a Rochester 2 jet so I thought what the heck lets give it a shot. The accelerator pump didn't want to work right anyway.
while I was at it I decided I would pull the valve covers and address the oil leaks and replace the pcv and breather. I pulled the heater box a while back and just looped the heater hose so I decided I would plug the lines and get rid of the loop... all was going well until I went to remove the nipple on the water pump and it twisted off with next to no force... off to the parts store I went new water pump PCV Valve, breather, assortment of grommets, new air cleaner... all in all was not a bad way to spend a Saturday... I rebuilt the carb over the week after work. I can say after a spin around the block that the carb seems to be running great and no more bog when I punch it! what's a thread without a few pics. |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|