|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
02-25-2015, 05:34 PM
|
#1 |
|
Registered User
Join Date: Apr 2007
Location: pasadena,TEXAS
Posts: 880
|
your suggestions are welcome
as many of you might have read in a earlier post about nut size on the ubolts on the rear axle, I am trying to install a ece super track bar. worked on it this afternoon and got the nuts off on the passenger side. my problem is I can not get the trailing arm and axle separated . I have sprayed 1/2 a can of krol on it and tried using a wedge tapping on it with a sledge hammer and it hasn't moved . it looks like the narrow passage where the u goes thru the trailing has years of red dirt packed in it. any suggestions are welcome cause i'm sure that someone here has had the same problem, that is one of the things that is great about this site, past practices!!
__________________
1971 Cheyenne SWB 402BB, 700R4, 3.73 posi, PS, PB, A/C, Tilt, Tach "Wanda" Don't argue with idiots, People watching may not be able to tell the difference... There's someone in my head........But it's not me...... cheap tricks thread great info here!! http://67-72chevytrucks.com/vboard/s...d.php?t=489394 |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode