K30 wont steer left after lift - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ralphieboy · 04-10-2015, 12:02 PM

A little back ground info. Truck is a 84 K30 with Dana 60, 5" of lift using 4" Tuff Country HD springs and 1" zero rate. Per ORDs advice I went with there drop pitman arm instead of steering block. (And I know crossover is best, just not in the budget right now.)

Now the truck turns great to the right, but barely turns at all to the left. I have adjust the drag link both ways, and cannot correct for this. Almost like I got the pitman arm on in wrong place but arent they keyed to go on only one way?

Pulling my hair out here, any advice?

04-10-2015, 12:02 PM	#1
Ralphieboy Registered User Join Date: Nov 2014 Location: Asheville, NC Posts: 6	K30 wont steer left after lift A little back ground info. Truck is a 84 K30 with Dana 60, 5" of lift using 4" Tuff Country HD springs and 1" zero rate. Per ORDs advice I went with there drop pitman arm instead of steering block. (And I know crossover is best, just not in the budget right now.) Now the truck turns great to the right, but barely turns at all to the left. I have adjust the drag link both ways, and cannot correct for this. Almost like I got the pitman arm on in wrong place but arent they keyed to go on only one way? Pulling my hair out here, any advice? Last edited by Ralphieboy; 04-10-2015 at 12:10 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.