![]() |
![]() |
#1 |
Registered User
Join Date: Apr 2015
Location: Mansfield, Texas
Posts: 62
|
Advice on 350 Crate
I have a 35 GM Goodwrench Crate that appears to be all stock in a 68 C-10 longbed. I know the engine was replaced but I have no idea how long it has been in the truck or how many miles. Did compression check and had 2 cylinders with 0 compression. Starting opening the motor up and found 2 broken push rods. Cam appears ok as lifter travel was good. Exhaust and intake valves on 3,5,4,6 were white and when passenger head was pulled, number 4 had a buildup of oil on top of piston.
Heads going to machine shop to check. Looking for cam advice for an otherwise stock motor. Can anyone recommend a place for good rockers, pushrods, good but inexpensive gasket set and plugs. Any other things I should check for? What about a good quadrajet rebuild kit. I think the fuel bowls were leaking and have caused the rings to wash out some. Jimmy |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|