IFS Install This Weekend - Need Advice

[Dan in Pasadena]

Thanks solidaxle!

Good info, will check them both out.

Anyone have a link to Fatman Fabrication ifs installation instructions for Task Force trucks? STILL haven't found mine and I know I have them.

Got a lot of logistical issues sorted out this afternoon after work with my BIL. Got my big 60 gallon upright compressor moved & wired up and I think there's a switch problem because I know I've got power to the switch and can't make it turn on. Compressor not frozen, turns freely. Power to the switch for certain. I'm guessing a replacement switch is an order only item, DOH!
Truck is centered in the driveway in as level a spot as I have. Leaving now for a family graduation(geez) so tomorrow it'll get leveled and doghouse is coming off, front suspension coming off. Already bought plate for frame boxing, 4-1/2" diameter heavy wall pipe for notching rear of frame and smaller, 1-1/2" heavy wall pipe for R&P notch and some 2-1/2 x 2-1/2 Angie iron for stabilizing frame rails before pulling front cross member off. Will do about and from below on front horns and on top at rear near firewall. Still need magnetic protractor.