CPP Drop Spindles - MOD and Steering Box - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rgrhoward · 07-07-2015, 01:02 PM

So the spacing differences between the Modular and OE spindles have been beat to death. I have a different question...

Will the narrowed track width of the Modular spindles interfere with a power steering gear box?

Truck is a 64, i am keeping the stock crossmember and running the 15" OEM Wheels for disc brakes. I know its not an issue for a lot of guys as they switch to a rack and pinion and crossmembber. I am keeping the power gear box.

Just wanted to see if anyone has had any issues in the past.

07-07-2015, 01:02 PM	#1
rgrhoward Registered User Join Date: May 2015 Location: Tacoma Posts: 18	CPP Drop Spindles - MOD and Steering Box So the spacing differences between the Modular and OE spindles have been beat to death. I have a different question... Will the narrowed track width of the Modular spindles interfere with a power steering gear box? Truck is a 64, i am keeping the stock crossmember and running the 15" OEM Wheels for disc brakes. I know its not an issue for a lot of guys as they switch to a rack and pinion and crossmembber. I am keeping the power gear box. Just wanted to see if anyone has had any issues in the past.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.