|
07-10-2015, 05:48 PM
|
#1 |
|
Quit if it's not FUN!!!
Join Date: Jul 2010
Location: Indian Trail, N.C,
Posts: 864
|
Fan shroud question.
With the onset of some really hot weather, I would like to add a fan shroud. My 350/260 crate with GM serpentine system runs right at the thermostat range (180) while moving. I have a new copper/brass radiator and it works really well. It can idle in 95*+ weather thru a typical drive-thru line, but the temp rises to 220*. Not a problem, but it appears that a shroud would help. Here's the the rub - The serpentine fan is 20" in diameter, way too big for my factory shroud. The fan sits almost dead center in the radiator (about 2-1/2" back from the core.)........... Have any of you guys, running the serpentine set-up, found any shroud that fits?
I don't have access to the fab. shop I used to, so any help would be appreciated.
__________________
MY MOTTO: Eat it all up, Wear it out, Use the last few drops, Spend all you've got, Late in life, you'll think of the things you didn't do, not the things you did. - Get out and experience life ! . Robbie Robinson a.k.a. TobyArnot (Toe Bee or not toe bee) 
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode