![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Oct 2013
Location: Winfield KS
Posts: 489
|
New questions regarding NV4500 swap & slave clearance
I was getting my parts rounded up for the swap and was about to order the Advanced Adapters bellhousing so I could run an external slave cylinder on the drivers side. The reason for this is because I was under the impression that the front driveline (4X4) would interfere with the slave cylinder on a stock height truck.
However I am being told now by someone else that I do not need the high $$$ bellhousing and a factory bellhousing with the slave on the passenger side will clear everything with no problems. His claim is that he has swapped 5 NV4500s into different trucks and used the factory bellhousing on each one with no problems. Can anyone confirm this? If I can use a factory bellhousing that would sure be cheaper on my pocket and could find one locally. Thanks in advance
__________________
88' Chevy V30 3+3 4x4 Dually 454 TBI/NV4500/NP205 |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|