![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#11 |
Registered User
Join Date: May 2013
Location: Kansas City
Posts: 572
|
Re: "Albert" -- 1949 AD, S10 Chassis
Here are some shots of the cab mounts with the cab bolted in place.
![]() ![]() From the top of the frame to the bottom of the cab floor support measures 4 in. ![]() ![]() ![]() I ran an 11 GA 2x1 rectangular tubing between the two rear cab mounts and bolted to the bottom of the floor. ![]() ![]() Measurement for reference. The cab mount height was set to level the cab to the frame. ![]() ![]() ![]() The front cab mounts bolt to the original front cab mount holes. ![]() The rear cab mounts bolt to one of the original shackle bolt holes. The 2x1 cross bar uses three 3/8 bolts to bolt it to the bottom of the floor. ![]() ![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|