![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Aug 2006
Location: Redmond, WA
Posts: 6,332
|
Wilwood C10 brake pics
Just about done the 4-wheel-disc conversion for my 2+2, which happens to use a C10 axle. Since it's the same kit, I figured I'd post a picture for those curious about it on the trucks.
I also included a front pic, but again that's a B-Body, so the setup is a little different. But the rear should be identical. The fronts use a 1/2" lug and the rear on my car was only 7/16" (puny!) so I upsized everything to 1/2". I assume that's what the light duty trucks are (my 2500 is 9/16" now). Next to shimming it to center the caliper properly the e-brake cable looks to be the biggest challenge, that's today's task.
__________________
1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|