Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
02-07-2016, 09:48 AM | #1 |
Registered User
Join Date: Aug 2009
Location: Wiltshire, UK
Posts: 157
|
'79 TH350 Crossmember & '63 frame reference
Just in the process of offering up the TH350 crossmember to the frame of my '63 and I cannot quite get a snug fit - there is a small gap between the upright side of the crossmember (that bolts to the side of the frame) and the frame itself. Is this usual and down to a slight difference in frame size?
I'm thinking that to get around it I could slot the holes that the transmission bolts go through, trim down the opposite end of the crossmember and push it across as it were - the slots will allow the trans to be re-centred on the crossmember. Thoughts/experiences?
__________________
'63 C10 Longbox fleetside '94 C1500 Sierra ex-USAF beater |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|