Need some ideas about dropping suspension - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Danny Grizzelle · 03-26-2016, 01:00 AM

Getting ready to start the build of a 70' C10. I'm working on replacing the front control arm bushings now and will move on to the springs and spindles next. I have an idea of going with 2.5" drop spindles and 4" rear springs. Not sure of the wheel size I'll end up with at this point, would like it lowered but not on the ground. Could I see some pictures and get any pointers on anyone with a similar drop?
Thanks folks for any help I can get.

03-26-2016, 01:00 AM	#1
Danny Grizzelle Registered User Join Date: Jan 2016 Location: Mccalla Alabama Posts: 20	Need some ideas about dropping suspension Getting ready to start the build of a 70' C10. I'm working on replacing the front control arm bushings now and will move on to the springs and spindles next. I have an idea of going with 2.5" drop spindles and 4" rear springs. Not sure of the wheel size I'll end up with at this point, would like it lowered but not on the ground. Could I see some pictures and get any pointers on anyone with a similar drop? Thanks folks for any help I can get.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.