1968 c10 brake problem
Good Morning
New member here, first post
I have a 1968 c10 with power drum brakes. Have replaced all the brake wheel cylinders and master cylinder but can not get any fluid to the rear cylinders. bench bled the master before installing and now not sure how to procede. there is a proportioning valve on the output of the master cylinder. I have not replaced the rear rubber flex hose. When I went to replace the rear cylinder had the wrong ones and took couple days to find correct ones. During this time I left the brake line loose and the fluid drained out of the rear master cylinder so I just replaced the master cylinder at this time. Any help/suggestions would be most appreciated.
Thanks
Roy Jones
|