carburetor neck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**dmjlambert** · 05-04-2016, 09:58 AM

Hi
What is this part properly called? In this picture from jimbosprint's 72 C20 I have added an arrow pointing to it. I am missing this part from my 69 CST/10 with 350 4bbl engine, and when I received the truck it had a piece of pipe and assorted washers on the air cleaner stud to make the wing nut hold the air cleaner top, and the crankcase breather inlet hose was just shoved off to the side taking in air and critters from the engine compartment.
Did this "neck" come in different heights, or were they all pretty much the same? If I want to put this back to stock, is this a part I need to hunt around for used?
Thanks
David

05-04-2016, 09:58 AM	#1
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,859	carburetor neck Hi What is this part properly called? In this picture from jimbosprint's 72 C20 I have added an arrow pointing to it. I am missing this part from my 69 CST/10 with 350 4bbl engine, and when I received the truck it had a piece of pipe and assorted washers on the air cleaner stud to make the wing nut hold the air cleaner top, and the crankcase breather inlet hose was just shoved off to the side taking in air and critters from the engine compartment. Did this "neck" come in different heights, or were they all pretty much the same? If I want to put this back to stock, is this a part I need to hunt around for used? Thanks David Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.