06-28-2016, 12:06 PM | #8 |
Registered User
Join Date: Nov 2013
Location: Las Vegas, Nevada
Posts: 376
|
Re: 72 Plaid Sub
I cut an X in the top of the rivets with a cut off wheel and then drilled them with a 3/8" bit. I kept the bit sprayed with Aero Kroil and only used 2 bits to remove almost every rivet in the frame. This is not a bad way to go if you don't like using an air hammer/chisel.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|