rear bags which ones?

[rtinniste]

Okay so here's the run down s10 swapped 51. I'm now finishing up the rear end and don't want to do the step notch or anything until I have the bags I'm going to use.

Front: speedway uppers, dehumped lowers, thorbros bag cups with airlift d2500 bags, belltech drop spindles, spring pockets cut and flared, little shop no toe steering.

Rear: thorbros 4 link with a bolt in c notch.

misc info: running boards hang 2" below the s10 frame and is the lowest point on the truck, I'm running a 350/th350.

With everything listed above my truck lays the running boards flat. Now I'm not 100% happy with the bolt in notch I couldn't get it to land exactly where I wanted, I feel like its a potential weak spot, and I cant fit a bump stop.

So now I'm planning on scraping the c-notch and building a small step notch/bridge. I want to run bag over axle keep everything in one clean simple package. Since I plan on running a gas tank behind the axle between the frame, exhaust dumped before the axle out the fender. And I've ordered the brackets already.

I was thinking d2500 to match my fronts so I can keep a extra bag in the truck. But I read d2500 will ride like garbage on the rear and give almost no lift and I should run a f9000 sleeve bag or at least a d2600.

My ride height is going to be low running boards 2 inches off the ground at most, I just need to be able to clear speed bumps with out getting hung up so maybe 6" lift total. So a d2500 with 7.7" of stroke at a 1:1 ratio seems right but maybe there's something I'm missing.

What bags would you suggest and why?