First swap...fuel system questions

[enroberts]

Hi there. I've recently gotten a '99 4.8 motor into my C10. Now it's time to get the fuel system wrapped up so I can fire the truck up! That said, I have a few questions I'm hoping you experts can answer. Forgive my ignorance in advance!

1. I plan on using a factory Camaro or S10 tank and factory fuel pump. This motor is all stock and I plan to leave it that way. It's also not a show truck by any means, just a fun driver! The truck currently has the tank behind the seat which I obviously can't use (unless I'm wrong!). For ease of installation, can I run a braided fuel line from the pump to the fuel rail on the 4.8 (with a filter in line of course)?

2. The 4.8 has a return line at the fuel rail on the driver's side (smaller diameter line). Can I run braided line from this point back to the pump as well?

3. What fittings/adapters/connectors/clamps do I need if I can run braided line the entire length?

4. Is anything else required if I'm using the stock tank/pump/motor?

Thanks in advance!!