Brakd bleeding/Proportioning valve - The 1947 - Present Chevrolet & GMC Truck Message Board Network

akart · 11-22-2016, 06:21 PM

Valve has a pin on the end and I hold that in w/ a "C" clamp while bleeding the brakes.Is this correct? Saw a thread s few days ago (can't find it) which says I should use a shim gizmo and loosen a bolt to slip it in and it goes under the mounting bolt,to hold the valve open?? I do not understand. Just put all new lines in and it is pulling to the right. Thinking; I will try to rebleed the brakes.
Thank you for your help. I mean (Brake bleeding) won't let me edit the title.

11-22-2016, 06:21 PM	#1
akart Registered User Join Date: Sep 2014 Location: Manley Hot Springs Alaska Posts: 253	Brakd bleeding/Proportioning valve Valve has a pin on the end and I hold that in w/ a "C" clamp while bleeding the brakes.Is this correct? Saw a thread s few days ago (can't find it) which says I should use a shim gizmo and loosen a bolt to slip it in and it goes under the mounting bolt,to hold the valve open?? I do not understand. Just put all new lines in and it is pulling to the right. Thinking; I will try to rebleed the brakes. Thank you for your help. I mean (Brake bleeding) won't let me edit the title. Last edited by akart; 11-22-2016 at 06:24 PM. Reason: miss SP

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.