![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Mar 2007
Location: San Pedro River, SE Arizona
Posts: 734
|
Continuing problem with Carter AFB - need insight
(Latest problems noted in post #18))
Have never had to fix or replace an electric choke/element. Just removed this carb and cleaned inlets and needle/seat aspects because it would not take in fuel, even with 9 psi from pump (ethanol caused surface build-up on needle valves so they stuck) - re-installed and it fired up and ran great. BUT, once warmed up it was very rich at idle and stalled. Took a look at the electric choke - it was smoking from under the adjustment cap and the choke baffle was mostly closed. Could the heated element in there have cooked and, if so, why? Would that be common? With key on, still have 12v to the choke and across the two terminals. Nothing in the wiring was changed during the remove/re-install. Is an element burnout likely? Can a person replace whatever burned, or is a new unit needed? Thanks for any insight.
__________________
CCCC 67 Sting Ray Coupe 327 4sp; 68 K10 Suburban 327 4sp; 69 K20 Lifted 383 4sp; 69 C80 Fire Truck 478 V6 5sp/2sp; 69 C20 Longhorn 327 4sp; 70 C30 Wrecker 350 4sp; 70 C30 Flat Bed 350 4sp; 71 C20 LWB 350 4sp; 72 K5 Blazer 350 4sp; 72 C30 Flat Bed Gooseneck Hauler with sleeper 350/TH400; 72 C20 Longhorn 402 4sp; 52 Mack LTL Supercharged Cummins 5sp x 3sp; 01 Dodge 5.9 HO Cummins 6spd; 02 Safari Trek 2430 8.1 Vortec on Workhorse Chassis; 03 Silverado 2500 HD 4wd Duramax/Allison Moved but still in the family 70 C20 Custom Camper 350/TH350; 72 K5 Blazer CST Highlander 350/TH350 Recently sent to new homes 72 C30 MoHome 402 4sp; 72 K5 Blazer Conv 350 4sp; 75 GMC 6000 Aerial 350 w Allison; 72 GMC 3500 Utility 350 4sp; 70 GMC 3500, 350 4sp Last edited by CCCC; 09-28-2017 at 11:22 PM. Reason: Update |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|