Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
03-03-2017, 11:48 PM | #1 |
Registered User
Join Date: Feb 2004
Location: brownfield texas (west texas)
Posts: 1,936
|
Whoohoo today's project is a mile stone!
Well I finally converted over to powersteering....no more work out to park or maneuver in a shop.....I cant thank the board members enough for the info on parts for the swap! Here is the rundown!
Gearbox complete with pump and hoses (clean one) from a 84 burb= $75 PS pump complete with bracket and pully from 2004 5.3=$35 bucks New pressure hose rock auto=$17 New moog pitman arm rockauto=$48 New belt napa=$36 1' low psi PS hose=$4 1 qt ps fluid=$5 Couple of new Orings= few pennies😆 So the grand total@$220 for a improvement that no one should pass by! As per other boar members suggestions I pulled the fitting and valve out of the old pump and installed in the new pump. I used a stock 84 high psi hose. I could have bought the box alone for $50 but i figured the valve and low side hose fitting were worth the extra coin. Plus i pulled it all together to keep dirt etc out untill the install.
__________________
The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|