63 Turn Signal Removal

[Cris]

I read the previous threads on turn signals but am having a problem with the last step, removing the return/switch mechanism. The steering wheel is off and I have removed the three screws that hold the mechanism. It is now loose, but I cannot remove it. It feels like wires are holding it in.

Does the steering wire harness plug into the mechanism?

Is it just a matter of feeding enough wire at the bottom of the column until you can pull out the mechanism and release the connector? Does the connector have a lock on it?

Before I went any further, I though I'd at least ask to see if someone has BTDT.

Also who makes the best replacement for the return/switch mechanism?

Thanks, Cris