Power Steering conversion and I broke the freekin 4 bolt gear box case plate..HELP! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChevyDude · 04-08-2004, 04:20 PM

I was installing the PS steering gear box and had mistakenly put the pitman arm on in the wrong position. While taking the pitman arm back off the 4 bolt case on the gear box opposite side of the pitman arm broke. It's the case that has what looks like an adjustment screw and is sealed with a rubber o-ring. Can I buy another one of these cases??? Any help would be appreciated, my nice day off just turned to sh!t.

Thanks Alex

04-08-2004, 04:20 PM	#1
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Power Steering conversion and I broke the freekin 4 bolt gear box case plate..HELP! I was installing the PS steering gear box and had mistakenly put the pitman arm on in the wrong position. While taking the pitman arm back off the 4 bolt case on the gear box opposite side of the pitman arm broke. It's the case that has what looks like an adjustment screw and is sealed with a rubber o-ring. Can I buy another one of these cases??? Any help would be appreciated, my nice day off just turned to sh!t. Thanks Alex __________________ Alex 1971 Lil' Red 350 SBC 700R4 Last edited by ChevyDude; 04-08-2004 at 04:29 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.