1971 k20 badmax

[Rednwhitec20]

Originally Posted by Dieselwrencher

I'd see if you can find some one to weld them first. How far from Pittsburgh Kansas are you? There's a board member that lives there that could probably weld these for you. What kind of tank are you using? A draw straw is a lot cheaper and can be obtained a lot of places. I use 1/2" ones in all my builds most times.

About an hour and a half. School starts the 21st of august and I will be in fort Scott (about 30 minutes north of Pitt.) If he doesn't get it welded soon enough I'll look into it! I think I'm going to cut the 3/8" line and then drill it to 1/2" and run some stainless 1/2" in its place.