Clutch Problems Need Advise - The 1947 - Present Chevrolet & GMC Truck Message Board Network

treveiger · 08-11-2017, 01:52 PM

I have a 69 Chevy C20 with a 307/sm465 and ever since I bought it the clutch rod rubbed on the fire wall. Long story short I started working on the truck again and decided to tackle the clutch issue. Pulled out the clutch pushrod and it looked bent. So I heated up the rod, bent it straight and put it back in. As soon as I pressed the clutch in the rod bent again. After messing with it all morning I need some help figuring out what is wrong. Do I need a new rod, z bar, or any other linkages? Any help or pictures to aid me would be great.

08-11-2017, 01:52 PM	#1
treveiger Senior Member Join Date: Jul 2010 Location: South Dakota Posts: 4,093	Clutch Problems Need Advise I have a 69 Chevy C20 with a 307/sm465 and ever since I bought it the clutch rod rubbed on the fire wall. Long story short I started working on the truck again and decided to tackle the clutch issue. Pulled out the clutch pushrod and it looked bent. So I heated up the rod, bent it straight and put it back in. As soon as I pressed the clutch in the rod bent again. After messing with it all morning I need some help figuring out what is wrong. Do I need a new rod, z bar, or any other linkages? Any help or pictures to aid me would be great. Attached Images __________________ 1969 Chevy c20(Miss Hackjob)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.