|
04-14-2004, 09:10 PM
|
#1 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,064
|
What do 'ya think....
For the past few months I've been struggling w/an intermittent fault w/the ign switch. Some times it will start right up.... other times I'm forced to use my remote start switch.
Since it will spin right over sometimes by itself & always w/the remote switch, I concluded the switch on the column base was going kaput. I went to my GM guy & he couldn't find me the correct switch for my 74, so I picked one up @ the 'zone' & installed it last night....  Would you believe w/my incredible luck, it still does the same crap. So I swapped the GM part back on w/no improvement.... yet when both are hooked up the trucks starts on the first try w/the remote. The only thing I didn't like was after swapping to the new part the ign lock itself started getting much harder to turn (if there's no switch @ the bottom, the lock tumbler rotates freely). Any diagnosis out there?
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode