Positive camber w/disc conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

civltruck · 10-24-2017, 10:33 AM

I've got a 69 C30 Longhorn frame that I'm turning into a Ratrod. The cab and bed were completely rusted. The truck had "normal" camber with it's original drum brakes with about 3/4" of shims. I got spindles off of a 74 C20. Now I appear to have a positive camber issue on the right side only. The left looks just fine with 3/4" of shims. I took out all of the shims and it still looks positive. I got drop spindles and it still looks positive. Will the offset upper control arm shafts work to help correct this issue? Thanks.

10-24-2017, 10:33 AM	#1
civltruck Registered User Join Date: Sep 2017 Location: Charlottesville, Virginia Posts: 3	Positive camber w/disc conversion I've got a 69 C30 Longhorn frame that I'm turning into a Ratrod. The cab and bed were completely rusted. The truck had "normal" camber with it's original drum brakes with about 3/4" of shims. I got spindles off of a 74 C20. Now I appear to have a positive camber issue on the right side only. The left looks just fine with 3/4" of shims. I took out all of the shims and it still looks positive. I got drop spindles and it still looks positive. Will the offset upper control arm shafts work to help correct this issue? Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.