Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
11-11-2017, 11:16 AM | #1 |
Registered User
Join Date: Jul 2014
Location: Bowie, Maryland
Posts: 82
|
64 Chevy C-10 Horn Relay not working
Greetings,
Although I have looked at some horn relay postings, I apologize if I missed one that covered/addressed my particular problem. So forgive me if this has already been covered. Background ======= I replaced all of my wiring harnesses with an American Auto Wire kite. The kit has a three blade horn relay. Since the kit requires a 1-wire alternator (internal voltage regulator), I opted to use the kit's horn relay and discontinue using the OEM relay I had, which was not a 3 blade relay. If you regard the blade placement as a triangle, the blade at the top takes a red 12-volt wire that goes to the fuse box. The lower right blade takes a green wire that goes to the horn. The lower left blade takes a black wire that goes to the black wire on the horn connector cluster. I have triple checked the wiring and it is reflected as above. However, I have done something wrong since the horn does not work; and it did work before I swapped out the old wiring. As an additional test, I also hooked up another relay I purchased from Auto Zone this morning. I still had the same no horn sounding problem. This has to be something I have done wrong in terms of wiring. Any thoughts? Let me know what I am missing please. Eddie |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|