The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-02-2018, 11:55 AM   #1
CSHADES
Registered User
 
CSHADES's Avatar
 
Join Date: Nov 2015
Location: portage wi
Posts: 506
New Process 203 chain

Last winter the old 77 plow truck was clanking pretty bad in 4wd under a load. I pulled the rear driveshaft because it was shaking the truck pretty bad at 55mph. The shaft was very crusty and the slip joint was very worn. so the driveshaft place built me a new shaft which cured that problem. When I pulled the shaft I put the truck in hi lock to move it and figured out my clanking noises were coming from the transfer case, so we pulled the case out yesterday and pulled the tail shaft and covers off and had a look. the chain is very stretched and needs to be replaced. Anybody out there have any ideas where I may obtain a new chain? I have looked online and also called the drivetrain place here in town and have had no real luck. I know there has to be one out there, I did find a used trans and case on craigslist for $275 but my concern is if it is going to any better than what I have.
CSHADES is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:16 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com