Stopping After the swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sluggy · 10-21-2018, 05:08 PM

I have an ls3/6l80 combo in my 62 C20. Currently i have discs up font and drums in the rear.
Because I still have the original 62 front suspension, I have used Early classics C20 to C10 conversion spindles, and their disc kit on the front end. Running a vacuum assist master cylinder. I changed the rear end to a 12 bolt and am just running the stock drums on the rear.
I have had a couple of close calls where she just keeps rolling !! So I feel like I need better anchors.
Id be interested to hear what others are using ?

10-21-2018, 05:08 PM	#1
sluggy Registered User Join Date: Mar 2017 Location: Auckland, NZ Posts: 27	Stopping After the swap I have an ls3/6l80 combo in my 62 C20. Currently i have discs up font and drums in the rear. Because I still have the original 62 front suspension, I have used Early classics C20 to C10 conversion spindles, and their disc kit on the front end. Running a vacuum assist master cylinder. I changed the rear end to a 12 bolt and am just running the stock drums on the rear. I have had a couple of close calls where she just keeps rolling !! So I feel like I need better anchors. Id be interested to hear what others are using ?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.