Wheels: 15 on back, 17 on front - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PhilaTruck · 07-15-2019, 01:42 PM

Hiya haulers! Been a LONG time since I posted. I'm ready to buy wheels and am looking for advice and pics.

I want AR23's or from a similar period, like Weld Prostars
(back--15"diameter-10" width)
(front--17"diameter-8"width)

I would just go w either of these, but the ARs are only available up to 16". The Prostars only up to 15".

I'm not asking about backspace measurements. The truck is lowered and I'll need to get my own measurements. Likely going to be 5 in the back, 4 in the front. And I'm getting Ford 9" brackets welded on the rear housing, so we'll make it fit. TIA

07-15-2019, 01:42 PM	#1
PhilaTruck Right on the line, baby! Join Date: Oct 2003 Location: Phila, PA 19130 Posts: 1,486	Wheels: 15 on back, 17 on front Hiya haulers! Been a LONG time since I posted. I'm ready to buy wheels and am looking for advice and pics. I want AR23's or from a similar period, like Weld Prostars (back--15"diameter-10" width) (front--17"diameter-8"width) I would just go w either of these, but the ARs are only available up to 16". The Prostars only up to 15". I'm not asking about backspace measurements. The truck is lowered and I'll need to get my own measurements. Likely going to be 5 in the back, 4 in the front. And I'm getting Ford 9" brackets welded on the rear housing, so we'll make it fit. TIA __________________ 83 GMC 406 th400/3.73 Eaton Truetrac posi, headers, x pipe, & racePros. Tubular control arms, lowering rear springs, caltracs. Still ugly, but getting built right, although slowly Click and scroll down for site vendors! Subscribe here!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.