Door alignment question

[Peanut74]

Ok, my drivers door was so screwed up so I decided buy a reproduction door. The issue I am having is I have good gaps around the door except for the A-pillar. The gap at the bottom of the pillar matches the back and bottom of the door about 3/16" to 1/4". At the top of the pillar it a 1/16" at best and that's in primer. So my question is should I cut that joint to get more space. Or does someone have a method to move the door window frame a bit to get the gap even.

I have moved the door as far as it will go towards the back of the cab