Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
12-22-2019, 02:11 AM | #1 |
Registered User
Join Date: Feb 2013
Location: GA
Posts: 1,326
|
Brake line fittings help needed please
I visited 3 auto part stores today looking for help selecting the proper fittings for a 1/4 inch brake line that I will be flaring from a coil myself. No one at any of the stores knew how to help me. I was told each time to just go buy the pre fitted lines and call it a day. I was able to get the last part store to let me in the stock area where they had a rack of the lines with fittings and I tried out a few to see if the fittings would take to at least have an idea on the master cylinder I bought what fittings to get.
The master cylinder I bought is this one https://www.rockauto.com/en/moreinfo...33&jsn=3&jsn=3 I see that the primary is 1/2 " and the secondary is 9/16" but the thread pitch I didnt know so I tried some out and I think the primary is 1/2" - 20 and the secondary looks to be 9/16" - 18. I think this is right but wanted to check. Here are pics of the primary |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|