Longer wheel studs

[spitfire980]

Hi Guys

Iv installed the CPP brake kit and switched to a 5x5 setup then used an adapter to a 5x4.75 setup however the CPP 5 lug axle studs are too short for safe daily use.

Iv asked CPP for specs of the studs and here is their reply:
"Dorman 610-258 1/2-20 Serrated Wheel Stud - .536 In. Knurl, 1-23/32 In. Length"

Now, I can't find anything with a .536" Kurl thats longer than 1-23/32. I was reading on other forums and somebody recommended this, DORMAN 610298

Dorman 610-258 vs Dorman 610-298

Head Diameter 0.656 vs 0.735
Knurl Diameter 0.536 vs 0.55
Shoulder Length 0.25 vs 0.688
Thread Length 1.391 vs 1.117
Under Head Length 1.719 vs 2.04

Does it work? does anybody else have any other experiences?

Thanks