1972blueC10 Engine build that escalated!

[wake328]

Hey Everyone. Going to start out this thread with the engine build portion, as the title states, clearly it went beyond that. As expected, right?? I ended up with the front clip completely off and doing more of a front end restoration versus a engine swap.

More to come! Swing by instagram as well 1972blueC10

Here is the parts list on the engine build

Machining Block -1406
Machining Heads -285

Hardware & Gaskets
ARP Accessory Fastener kit 534-9801 -99.99
ARP head bolts, intake and head gaskets, and intake bolts - 180
ARP Main studs - 71
ARP Oil pump stud 230-7003 - 4.99
ARP Rocker Studs 100-7101 - 43.99
ARP Balancer bolts 134-2503 - 35.99
ARP Flex plate bolt kit 100-2901 - 9.99
Dart Guide Plates 27001110 - 15.92
Head Dowels - 2
Oil Pan Gasket Milodon 41008 - 37.95
Milodon Timing Cover Gasket Sets 65503 - 10.95
COMP Cams Cam Lock Plates 4605 - 2.99
Valve Cover Gasket Felpro
Valve Cover tab Edelbrock 44263 - 21.9
Rear Main Seal Fel-Pro 2912 - 28.8

Internals
Speed pro pistons 8KH859CP40 - 313
Scat crank 935050 - 266
King Rod Bearings CR807XPN .001 - 54
Clevite Cam Bearings SH2905 - 26
Oil Pump Milodon 18706 - 86.95
Oil Pump Shaft 23050 - 13.95
Howards Lifters Max effort 91160 - 456.99
Scorpion Rocker Arms SCP1003 - 269.99
Comp Cams 12-000-8-13436 - 331.5
Timing set Cloyes Street True Roller 9-1100 - 36.99
COMP Cams 211 - COMP Cams Cam Buttons - 16.99
Push rods - Comp Magnum 7609-16 - 116.99
Fuel pump push rod - Comp Cams 4616 - 18.99

Externals
Pioneer Flex Plate FRA104 - 25
Powerbond Harmonic Balancer PB1050N - 58
Harmonic timing mark cover 141728 - 26.06
Heads NKB-274 - 738.5
Oil Pan Milodon 30701 - 124.95
Edelbrock 2101 intake manifold - 188.95
Timing cover Milodon 6555 - 32
Valve Covers tall - G3301B - 27.99

Total 5487.25