Correct Fasteners for 67-68 Grille Center Support - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pjmoreland** · 09-05-2020, 02:17 AM

A previous owner of my truck cut the center horizontal bar out of the grille and zip-tied a portion of a 71-72 grille in its place. I am in the process of returning it back to stock. The two smaller fasteners that attach the grille to the center support under the latch are missing. It looks like 1/4 or #14 screws would fit through the holes, and I'm assuming clip nuts need to be installed on the grille. I'd like to get as close to stock as I can. What size and type of fastener was on there originally?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

09-05-2020, 02:17 AM	#1
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,011	Correct Fasteners for 67-68 Grille Center Support A previous owner of my truck cut the center horizontal bar out of the grille and zip-tied a portion of a 71-72 grille in its place. I am in the process of returning it back to stock. The two smaller fasteners that attach the grille to the center support under the latch are missing. It looks like 1/4 or #14 screws would fit through the holes, and I'm assuming clip nuts need to be installed on the grille. I'd like to get as close to stock as I can. What size and type of fastener was on there originally? Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.