![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#11 |
Senior Member
![]() Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,011
|
Re: 57 Chevy Wagon - Californa Dreamin'
Thanks, guys! I talked to Rick at HRE yesterday and he wants to pick up the chassis on Tuesday, weather permitting. Our forecast calls for scattered showers on Tuesday and Wednesday, so I'm not sure what exactly will happen. It shouldn't take too long to get the body on and bolted down if all goes as planned. One potential fly-in-the-ointment is the remote battery cable. I ran a 2/0 cable from the rear of the car to the starter along the top of the frame rail. I won't know until the body goes on if will clear the ribs on the underside of the floor where the body bushings are installed. I tried using a straight edge to gauge whether I had enough clearance and it looks like I may have enough. But then again, I thought the coil covers would clear the firewall and was wrong about that. The good news is that it should be easy to move the cable to the side of the frame rail if all else fails. I gave Rick a heads-up about it, so they know to check it while it's on the two post lift.
.
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|