Help setting pinion angle

[N9nefingers]

I need some help from driveline angle wizards...I've been reading and searching but the info I'm finding is either melting my brain or contains links that no longer work. Like this one... http://www2.dana.com/pdf/J3311-1-HVTSS.PDF ...which is a bummer because most threads point to this as the one to follow. I have a '70 C10 with a 350 and T350 with a two piece driveshaft. I have it on bags with Accuair Elevel set at ride height. Currently my driveline points down to the carrier bearing then up at the pinion. I'm thinking this is not correct as that's what I've been reading. But that info is for one piece driveshafts. Anybody got a good link or advice? Any and all help would be awesome.