Youtube channel with how to videos on metal work - The 1947 - Present Chevrolet & GMC Truck Message Board Network

May70 · 11-20-2020, 12:04 PM

Those following my build thread have seen me install a new floor pan and I have finished the passenger side cab corner, pillars, inner & outer rocker.

I decided I would try to record the Drivers Side from start to finish so there was a complete step by step video series on this. I know there are a lot of bits and pieces on youtube and a lot of good threads but the videos skip a lot of steps. I know it would have made my life easier so here you go.

https://www.youtube.com/channel/UCkS..._as=subscriber

11-20-2020, 12:04 PM	#1
May70 Registered User Join Date: Jan 2019 Location: Hampton Roads VA Posts: 643	Youtube channel with how to videos on metal work Those following my build thread have seen me install a new floor pan and I have finished the passenger side cab corner, pillars, inner & outer rocker. I decided I would try to record the Drivers Side from start to finish so there was a complete step by step video series on this. I know there are a lot of bits and pieces on youtube and a lot of good threads but the videos skip a lot of steps. I know it would have made my life easier so here you go. https://www.youtube.com/channel/UCkS..._as=subscriber __________________ 70 C20 Build link : Project Montezuma http://67-72chevytrucks.com/vboard/s...d.php?t=794479 How to repair that rusted out 67-72 c10-c30! Please subscribe! https://www.youtube.com/c/MaycoCustomRestorations

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.