|
When driving, get a squeak as the driveshaft rotates
I have a 1988 700r4 that I bought recently from a salvage yard. I replaced all seals, filter, installed the Transgo SK-700JR kit. Seems to shift and work great but I have this squeak. It's a 2-piece driveshaft (3 u-joints). I replaced the rear u-joint. Still squeaking. So I got the burn on jackstands, got underneath, shifted to N, and rotated the driveshaft by hand. It's definitely coming from the forward area. It could be the front u-joint but it really sounds like it's coming from the transmission tailshaft area. When I was resealing the trans I had the tailshaft housing off because I replaced its seal as well, and inspected the shaft, bushing, and speedo setup.
Still looking for the source of my sqeak.
__________________
 '84 Suburban C10 Silverado - laying pinchweld to the ground on 22/24.
/Porterbuilt / Accuair / Bonspeed / Landsail / Auburn Gear / Richmond Gear / Moser / Raybestos / ProMaxx / Edlebrock / Street Demon / Taylor Wire / K&N / MSD / KillMat /
SOLD: 1985 GMC Sierra Classic 2500 3+3 Crew Cab Long Bed
|
10-18-2021, 03:46 PM
Threaded Mode